How to Disable Moisture Detected on Your Phone

Disable moisture detected

Greetings, Reader technogigs!

Have you ever encountered the “Moisture detected” message on your phone’s charging port? This warning message appears when your device detects moisture and restricts you from charging it, which can be quite frustrating. In this article, we’ll show you how to disable the moisture detected feature on your phone so that you can charge it without any issues.

Introduction

The moisture detected feature on your phone is designed to protect your device from potential damage caused by liquids. When the device detects moisture, it automatically stops charging to prevent any electrical mishap. However, this feature can be a bit problematic, especially if your phone is not exposed to any liquid. The good news is that you can disable the moisture detected feature by following these simple steps.

Step 1: Turn off Your Phone

The first step in disabling the moisture detected feature is to turn off your phone. This is a crucial step as it ensures that your device is entirely powered off without any standby mode or any other active process.

Step 2: Clean the Charging Port

The moisture detected feature can be triggered even by small amounts of dust or debris that may have accumulated in the charging port. Therefore, cleaning the charging port is essential to prevent any false alarm. To clean the port, use a soft-bristled brush or a toothpick to remove any dirt or debris gently. Avoid using water or liquid cleaning solutions, as they may trigger the moisture detected feature.

Step 3: Dry Your Phone

Once you have cleaned the charging port, the next step is to dry your phone completely. If you suspect that there may be moisture or any liquid on your device, dry it with a clean, soft, and dry cloth. Also, ensure that the charging port is clean and dry, as this can prevent the moisture detected feature from being activated.

Read Also :  How to Report a Reddit User

Step 4: Use a Third-Party Charging Cable

If your phone doesn’t charge correctly using its original cable, consider using a third-party cable that is compatible with your device. Sometimes, the charging port can be faulty, and the moisture detected feature can be triggered erroneously. Using a high-quality third-party cable may help you avoid any compatibility issues with your phone’s charging port.

Step 5: Restart Your Phone

After cleaning, drying, and using a third-party charging cable, try to restart your phone. Restarting your phone can help eliminate any software glitches that may be causing the moisture detected error to appear.

Step 6: Disable Moisture Detected Feature

If the above steps do not work, then you may need to disable the moisture detected feature on your phone. To do this, follow these steps:

Step Description
1 Go to the Phone Settings.
2 Scroll down until you find the “Device Care” tab and tap on it.
3 Tap on the three vertical dots at the top-right corner of your screen.
4 Tap on “Advanced” and then select “Lab Options”.
5 Scroll down until you find the “Moisture Detection” and tap on it.
6 Toggle the button to turn off the moisture detected feature.
7 Restart your phone and try charging your device again.

Strengths and Weaknesses of Disabling Moisture Detected Feature

The moisture detected feature on your phone is an essential safety feature that protects your device from any potential damage caused by liquids. However, this feature can create some issues, such as preventing you from charging your phone even when there is no liquid present. Here are some of the strengths and weaknesses of disabling the moisture detected feature.

Strengths

1. Prevents False Alarms

Disabling the moisture detected feature can prevent any false alarms that may occur when your device detects even small amounts of dust or debris in the charging port.

2. Charges Your Phone Even When There is No Liquid Present

Turning off the moisture detected feature can help you recharge your device even when there is no liquid present. This can be useful if you need to charge your phone urgently and do not have time to wait for it to dry out.

Read Also :  How to Change DPI on GIMP

Weaknesses

1. Increases the Risk of Damage to Your Device

Disabling the moisture detected feature can increase the risk of damage to your device from liquid spills or moisture. Therefore, it is essential to use this feature with caution and always take proper care of your device.

2. May Void Your Warranty

Disabling the moisture detection feature on your phone may void any warranty that comes with your device. Therefore, it is essential to check your phone’s warranty terms and conditions before disabling this feature.

FAQs

1. What does the “moisture detected” message mean?

This message appears on your phone when your device detects any moisture in the charging port. This is a warning message designed to protect your phone from any potential damage caused by liquids.

2. Can I still charge my phone when the moisture detected feature is active?

When the moisture detected feature is active, your phone stops charging to prevent any potential damage caused by liquids. Therefore, you may need to wait until your device dries out entirely before attempting to charge it again.

3. Is it safe to disable the moisture detected feature?

Disabling the moisture detected feature can be safe, but it may increase the risk of damage to your device from liquid spills or moisture. Therefore, it is essential to use this feature with caution and always take proper care of your device.

4. Can I clean my phone’s charging port with water?

No. It is not advisable to clean your phone’s charging port with water or liquid cleaning solutions, as this can trigger the moisture detected feature and cause irreparable damage to your device.

Read Also :  How to Access an iPhone Without Passcode or Face ID

5. Can using a third-party cable damage my phone’s charging port?

Using a low-quality third-party cable may cause compatibility issues with your phone’s charging port, which can lead to the moisture detected feature being triggered. Therefore, it is essential to use a high-quality cable that is compatible with your device.

6. Why does my phone keep showing the moisture detected message, even after cleaning and drying it?

If your phone continues to show the moisture detected message, even after cleaning and drying it, you may need to take it to a certified technician for further diagnosis and repairs.

7. Can I still use my phone when the moisture detected feature is active?

Yes. You can still use your phone when the moisture detected feature is active, but you may not be able to charge it until the device is entirely dry.

Conclusion

Disabling the moisture detected feature on your phone can be a bit risky, but it can be useful if you need to charge your device urgently and do not have time to wait for it to dry. However, it is essential to use this feature with caution and always take proper care of your device to prevent any potential damage caused by liquids. If you continue to have issues with the moisture detected feature, it is advisable to seek professional help from a certified technician.

We hope that this article has been informative and helpful to you. If you have any other questions or concerns, please feel free to reach out to us.

Thank you for reading, and stay safe!

Disclaimer

This article is for informational purposes only and does not provide professional advice. We do not take any responsibility for any damages caused by following the instructions in this article. If you are unsure about any of the steps or recommendations, please seek professional help from a certified technician.